This is our 4 tonne two post lift, available with [b]electric[/b] safety lock release. As with all our lifts this system is electro-hydraulic, chain lift, wire cable equalization with a powder coated finish. The power unit is fitted with an emergency manual pump for use in the event of an electricity power failure.
This lift is designed by an Italian company to Redmount's specifications and fitted with power unit (motor and pump) supplied by [b]Bosch Rexroth Group.[/b] Safety features include carriage locks, arm locks, rubber door protectors and height limit switch.
Height extension adaptors are included with this item, as are floor fitting bolts and full step-by-step installation instructions. The RM 4000 series can be supplied with either single or three phase power at no extra charge. (subject to availability).
This is our 5 tonne two post lift, supplied with an electric safety lock release mechanism. As with all our lifts this system is electro-hydraulic, chain lift, with a powder coated finish.
This lift is designed by an Italian company to Redmount's specifications. Safety features include carriage locks, arm locks, rubber door protectors, wire cable equalization and height limit switch.
This lift is supplied with 3 stage arms as standard and uses height adjustable screw up lifting pads plus height extention adaptors all included with this lift, as are floor fitting bolts and full step-by-step installation instructions.
As with all Rexroth (Bosch Group) products, the quality is ensured in the name. The motor used in the power-pack is either 2.2KW, or 3KW and doesn't require a starting capacitor. This is due to a soft start valve built into the pump. When the power-pack is activated, the oil from the reservoir is pumped through the pump and back into the reservoir until the flow reaches 6 litres per minute. At this stage the motor is at full speed, so the soft start valve closes, and the ram begins to lift. This operation all happens in a matter of milliseconds, ensuring the motor is under minimal load (and torque), resulting in a longer lifespan for both motor and pump.
Redmount 2 post lifts are all electro-hydraulic, made in accordance with the machine directive, EN 1493/98, and the standards defining earthing and low voltage (tested for electromagnetic compatibility). Synchronization of the cylinders is independent from load distribution, with the carriages mechanical levelling system. For more data on safety devices and specifications, please see individual items. Redmount 2 post lifts are European designed, and manufactured to Redmount's specifications. Safety features include carriage locks, arm locks, and height limit switch. All of our lifts are CE approved (as is all Redmount equipment). All Redmount lifts are fitted with Bosch Rexroth motors. Redmount have teamed up with Bosch Rexroth, to be the sole-supplier of power-pack (motor/pump unit) for all our two post and four post lifts. We are the only supplier to have this agreement in place. For further information, see Technical Information, below. Full step-by-step fitting instructions for all 2 post lift are included, as are the floor fitting bolts (hydraulic oil is not included, due to shipping regulations). Should you choose to install yourself, Redmount will be very happy to supply phone support, should this be required. Installation and delivery are available on all of the vehicle lifts at an additional cost. All our vehicle lifts are sold with a one-year parts warranty